Choosing Dawei Machinery Mover Straight Type, Rated Load 6000-18000 KGS: Application Fit and Specification Checks

1. Start with your load and site conditions

Before you compare models, write down:

• Total weight of the object you need to move (machinery, containers or other heavy objects), plus how that weight is spread across its footprint.
• Floor type and condition. The manufacturer says the mover is for hard, level surfaces only.
• Lifting method. The product is meant to be used with a jacking tool, which raises the load so the movers can be placed underneath.
• Route. Note whether the move is mostly in a straight line or needs tight turning.

These answers decide whether the straight type fits your job at all.

2. Published specifications

Points to confirm in writing: The source lists capacities and wheel counts as separate series. It does not say which wheel count goes with which capacity, or whether the rated load applies to one unit or to the full set of four. Ask the supplier for a model-by-model table before you size your order. The product description calls the rollers polyurethane in one place and the wheel material silicone resin in another, so confirm the wheel material too if your floor surface matters.

3. Selection criteria

Rated capacity with margin

Pick a capacity at or above the real weight the movers will carry. The manufacturer's main rule is do not exceed the rated capacity. The product description says the static load is more than twice the rated load as a safety margin. Treat that as a design margin, not extra working capacity.

Floor compatibility

The published description says the rollers suit a range of floors, including epoxy-painted floors and cement. It also says the wheel surface helps protect the ground and prevent oil contamination. Even so, the mover is limited to hard, level surfaces. If your route has slopes, gaps, soft ground or uneven surfaces, this product is not the right choice.

Load stability and placement

Place the four movers at the corners of the object. The load must be centered and held in place with a load-restraining device before it moves. Load the cargo at a vertical angle to avoid rollover. Check that your team has restraint equipment and a suitable jacking tool.

Maintenance expectations

The manufacturer says the design is simple, the sliding wheels need no maintenance, and the product needs little upkeep overall. Users must not alter the mover's metal structure.

Documentation

The product description mentions a CE test. If your market or internal rules need compliance documents, ask for the relevant certificates and test reports and check them before you buy. Don't rely on the product page alone. Price, lead time and availability are not covered here and must be confirmed directly with the supplier.

4. When the straight type does not apply

• Loads below its range, or moves that need tight turning: Look at the Dawei Machinery Mover 360° Rotation Type, 3000-6000 KGS. It is published with capacities of 3000/4000/5000/6000 KGS, 3/4/5 wheels, the same 80 × 70 mm wheel size, and non-slip 360° rotation. At 6000 KGS the two ranges overlap, so the choice comes down to the route and how much turning you need.
• Loads above 18000 KGS: This is above the highest rating for this product.
• Uneven, sloped or soft surfaces: These are outside the stated conditions of use for both mover types.

5. Pre-order checklist

1. Verified weight of the load and its center of gravity.
2. Required capacity matched to a confirmed model, including wheel count and whether the rating is per unit or per set.
3. Confirmation that the route is hard and level.
4. Jacking tool and load-restraining device available.
5. Control lever requirement stated in the inquiry, if needed.
6. Wheel material and compliance documents requested.
7. Price, lead time and delivery terms confirmed directly with Hebei Dawei Hoisting Machinery Manufacturing Co., LTD.

When you send an inquiry, include your load weight, footprint and floor conditions. That lets the supplier confirm the correct configuration of the Dawei Machinery Mover Straight Type, Rated Load 6000-18000 KGS. for your job.